What Tools Are Needed to Hang Kitchen Cabinets?
Do you know, What Tools Are Needed to Hang Kitchen Cabinets?In this blog post, we will go over some of those tools and how they can make all the difference when hanging your own cabinets!
Cabinets are heavy and it can be hard to find the right tools for the job. If you are installing your own kitchen cabinets, then you will need a few tools to get the job done. What Tools Are Needed to Hang Kitchen Cabinets? Luckily, there are plenty of resources on the internet to help you get started with your DIY project.
One of the most important tools is a drill-you will need it for screwing in screws and drilling holes into wood. You also want a level so that everything hangs evenly on your wall. What other tools do I need? Let’s take a look at them below!
What Other Tools Do I Want?: This depends on what type of cabinet door hinges and hardware system you are using with your cabinets.
If they use European-style kitchen cabinets, you will need the tools below-
- Drill
- Screwdriver
- Hammer
- Level
- Stud finder (optional)
- C-clamps or a helper to hold the cabinet in place while you’re installing it
How to hang kitchen cabinets
The first thing you need is your measurements for where the cabinet will hang on the wall. measure the height of your cabinet and cut your piece of wood accordingly.
Next, attach a screw to the top left-hand corner of the board then line up with where you want it on the wall and mark off with a pencil or pen.
Drill in place (make sure that it is level). Put one screw in every other hole along the edge of your board so that when you put two boards together they are secured tightly against each other.
Add another lengthwise piece if needed. Hang them as high as possible so there is plenty of room underneath them for counter space!
What other tools do you want for hanging kitchen cabinets?: If you are installing standard door hinges (with metal pins), and using the traditional type of cabinet hardware, then all that is needed is a cordless drill!
A cordless drill and level are needed for installing standard hinge type of kitchen cabinetry. If you are using rack grip or dowel rods in place of shelves, then wire cutters may be necessary too.
Kitchen Cabinet Hanging Tool Reviews:
What’s the most common mistake people make when hanging kitchen cabinets?
- The most common mistake people make when hanging cabinets is ignoring the weight of the materials that will be placed on the shelves.
- Hanging the cabinet too close to the floor and not accounting for heat coming from the stove is also a mistake.
- Another most common mistake is improperly measuring the door opening, which results in either too tight of a fit for the door or cabinets that are too short.
- When people hang cabinets, they often leave out the toe kick–the little flat board at the very bottom of the cabinet meant for kicking a vertical surface with your toes while standing on one’s tiptoes.
Drywall screws to hang cabinets:
No, they’re too short. If you use drywall screws to hang your cabinets, they will quickly loosen and you’ll be left with a cabinet door that’s spinning around on the ground. In addition, if you have a water leak or pipe break and the screw becomes wet, it may become corroded from the inside out.
Drywall screws are great for other things like the construction of shelves when used with backer boards. They also work well with hardwoods because they can grip tighter into the wood so they do less damage when drilled.
The most appropriate screws for use with cabinets are cabinet screws. These screws have an extra-long shank that allows them to penetrate more deeply into the wood and also allows room for countersinks which eliminate any unsightly bumps on the outside of a cabinet door.
1. How much weight can cabinet screws hold?
2. How many screws do you need to hang a cabinet?
Final words:
If you want to get your kitchen cabinets installed with minimal afford, it’s important that the tools needed for installation are available. We recommend having a drill and screwdriver on hand—preferably cordless ones–along with screws of various lengths. You should also have wood glue or adhesive tape (if using particle board) and silicone caulk on standby in case any repairs need to be made after installation is complete. With these tools by your side, there will be no problem getting your new kitchen up and running!